Animation Project The Valve Stem shown in the pictures is from an autoclave Fill Valve. Notice the two holes on the base plate
Image description
Typically, to remove the stem from the valve body requires a Spanner nut...which looks like a nut with 2 pegs on each side. The nut slides over the stem to the base plate where the pegs fit into the holes. Then a wrench is used to turn the nut. Most of the time, the pegs on the nut end up breaking off, rendering it useless Spanner Nut

What I am looking for in the animation is:

Image description
For Context, here is the complete valve being disasembled
Image description Image description Image description Image description Image description Image description Image description Image description